Csimsoft Bolt for Mac 2.0

Whatever meshing software you use, you need to add Bolt to your tool chest. Bolt is a push-button solution for generating all-hex meshes from complex geometries with little or no user interaction. Most models can be meshed by simply clicking the Mesh button. For other models, use the mesh controls to adjust mesh, size, and smoothing.
Get excellent results—fast.
For many complex simulations, Bolt produces equivalent or superior results when compared to pave-and-sweep meshes that take hours or days to generate. Depending on the type of analysis you are doing, Bolt can give you excellent results in minutes.
No more cutting up models.
Traditional pave-and-sweep meshing methods require you to decompose the model into sweepable volumes. This could be more than 60% of the time it takes to get a good mesh. Bolt uses a very advanced overlay-grid method to generate an all-hex mesh. Unlike the pave-and-sweep method that takes hours or days to prepare, Bolt allows you to mesh your model with the simple click of the Mesh button.
Tolerant of dirty geometry.
You know that all geometry is not the same. Many of the models you get from a designer require significant clean up and defeaturing. Repairing problems takes time, a lot of time. Bolt doesn’t require you to manually fix gaps, overlaps, or misalignments. Bolt uses a new volume fraction approach that has been developed and tested for more than six years to accurately represent the topology of your model without having to fix it first.
Massively parallel.
Even without having to clean up and prepare your geometry, large and complex models can take a long time to mesh. Bolt speeds up actual meshing time by dividing the model into parts and meshing each part in parallel. Bolt’s meshing algorithm is massively parallel and will use as many processors as specified and available.

无论您使用的网格软件,你需要博尔特添加到您的工具箱。螺栓是用于产生所有 – 己一个按钮溶液从具有很少或没有用户交互复杂几何形状啮合。大多数型号可以通过简单地点击网格按钮进行网格划分。对于其他型号,使用网格控制来调整目,大小和平滑。
取得了优异的成绩快。
对于许多复杂的模拟,相比于铺设和清除的需要几小时或几天来生成网格,当博尔特产生相同或更好的结果。根据分析你正在做的类型,博尔特可以给你在几分钟内优异的成绩。
没有更多的切割后续机型。
传统铺路 – 清除网格划分方法要求你分解模型分成可扫频卷。这可能是需要得到一个好的网时间超过60%。博尔特采用了非常先进的覆盖网格方法来生成一个全网的十六进制。不同于需要数小时或数天来准备铺路和清除方法,博尔特让您与网格按钮的简单的点击网格模型。
宽容脏的几何形状。
你知道,所有的几何形状是不一样的。许多你从一个设计师让模特的要求显著清理和defeaturing。修复的问题需要时间,大量的时间。博尔特并不需要你手动修复间隙,重叠或错位。博尔特使用已开发和六年多来准确地代表你的模型的拓扑结构进行测试,而无需先解决这个问题一个新的体积分数的方法。
大规模并行。
甚至无需清理和准备几何体,大型和复杂的模型可能需要较长的时间来目。博尔特通过将模型分成部分和网格并行各个部分加快实际啮合的时间。博尔特的网格算法是大规模并行并按规定和可用将使用尽可能多的处理器。

Bolt 2.0
Issue Description
[BOLT-16] Better capture of edges and sharp features in sculpt mesh
[BOLT-17] Capture and manage the sculpt command settings
[BOLT-45] Freeze and restart issue
[BOLT-49] Collapse edges issue when sculpt meshing
[BOLT-57] Enable geometric surfaces and geometric sidesets option in the Mesh tab
[BOLT-63] Project file save settings when exiting unsaved project
[BOLT-66] Update sculpt mesh panel
[BOLT-67] Change the behavior of the Project toolbar buttons
[BOLT-68] Do not select the actual mesh when selecting “Mesh” in the treemM

Screenshot:

 

System requirements:

  • OS X 10.7 or Later

下载地址:

内容查看此隐藏内容仅限VIP查看升级VIP

相关下载: